Differences

This shows you the differences between two versions of the page.

--- blog:linux:arch_vlan_rcconf [18.04.2012 19:04] – [Setup:] eanderalx
+++ linux:arch_vlan_rcconf [23.03.2013 18:34] (current) – Page moved from blog:linux:arch_vlan_rcconf to linux:arch_vlan_rcconf eanderalx
@@ Line 1: / Line 1: @@
 ====== Arch: VLANs in rc.conf ======
   * the package vconfig is needed in order to use VLANs
+<note important>Deprecated</note>
 ~~READMORE~~
    pacman -Sy vconfig
@@ Line 23: / Line 26: @@
 #       /proc/net/vlan/config
 #       /proc/net/vlan/[vlan-device]
+# rc.conf:
+# VLANs
+#
+#VLAN_DEVS=(eth0.6)
+######
+# /etc/rc.d/network
+# vlan settings
+#[ -f /etc/conf.d/create_vlans ] && . /etc/conf.d/create_vlans
+#
+### Variables ###
+LSMOD_PATH="/usr/bin/lsmod"
+VLAN_PATH="/proc/net/vlan/"
+VCONFIG_PATH="/usr/sbin/vconfig"
+#
+### Functions ###
 vlan_add()
 {
-	VLAN_PATH="/proc/net/vlan/"
-	VCONFIG_PATH="/usr/sbin/vconfig"
 	if [ -e $VCONFIG_PATH ];then
-                if [ ! -e /usr/bin/lsmod ];then
+		/usr/bin/lsmod | grep 8021q > /dev/null 2> /dev/null
-                        echo "/usr/bin/lsmod not available, unable to check module"
-                        exit 1
-                fi
-                /usr/bin/lsmod | grep 8021q > /dev/null 2> /dev/null
 		if [ $? == 0 ];then
 			if [ ! -e $VLAN_PATH$1 ];then
@@ Line 39: / Line 50: @@
 				VLAN_IFACE=`echo $VLANS_DEV | cut -d "." -f1`
 				VLAN_ID=`echo $VLANS_DEV | cut -d "." -f2`
-                                ifconfig $VLAN_IFACE up
 				$VCONFIG_PATH add $VLAN_IFACE $VLAN_ID > /dev/null 2> /dev/null
 			fi
@@ Line 49: / Line 59: @@
 	fi
 }
-for vlans in ${VLAN_DEVS[@]}; do
+vlan_rem()
-	vlan_add $vlans
+{
-done
+	vconfig rem $1
+}
+#
+### Main ###
+if [ ! -e $LSMOD_PATH ];then
+	echo "/usr/bin/lsmod not available, unable to check vlan module"
+else
+	for vlans in ${VLAN_DEVS[@]}; do
+		vlan_add $vlans
+	done
+fi