Welcome to my Homepage

Here I will collect the things I know or find out.
I'll write about Ubuntu/Arch Linux, Windows, Bash and Perl Scripting, Virtualisation and whatever else that could be interesting.
All I'm going to write here is tested by myself. I don't give a warranty of the functionality on other systems.

If there are questions, suggestions or something else feel free to send me an mail.

I'm also a hobby photographer, for those interested here is a link.

Recent Blog Posts

Bash - Functions

How to use functions in bash

notify-send from cron

tested with Arch x64 and Gnome 2.3

If you send an notfiy-send from a cron and use gnome then you normally get an error message.

Arch: VLANs in rc.conf

the package vconfig is needed in order to use VLANs

Deprecated

 pacman -Sy vconfig

There were several approaches in the Forum to configure VLANs in rc.conf. The Problem is: therefor its necessary to do extensive changes in “/etc/rc.d/network”.
After a update its possible that all changes are gone.
I wasn't interested in doing multiple changes in “/etc/rc.d/network” after updates.
That's why I write my own variant. It's only needed to change two lines.

With my Script it's only Possible to add VLAN and not to remove.
“vconfig” is designed that after a reboot VLAN interface are not configured.
If you want to achieve more, further changes have to include into “/etc/rc.d/network” and I wanted to avoid this.

Setup:

First the Script, put it into “/etc/conf.d”.

create_vlans

#!/bin/bash
#FILES
#       /proc/net/vlan/config
#       /proc/net/vlan/[vlan-device]
# rc.conf:
# VLANs
#
#VLAN_DEVS=(eth0.6)
######
# /etc/rc.d/network
# vlan settings
#[ -f /etc/conf.d/create_vlans ] && . /etc/conf.d/create_vlans
#
### Variables ###
LSMOD_PATH="/usr/bin/lsmod"
VLAN_PATH="/proc/net/vlan/"
VCONFIG_PATH="/usr/sbin/vconfig"
#
### Functions ###
vlan_add()
{
	if [ -e $VCONFIG_PATH ];then
		/usr/bin/lsmod | grep 8021q > /dev/null 2> /dev/null
		if [ $? == 0 ];then
			if [ ! -e $VLAN_PATH$1 ];then
				VLANS_DEV=$1
				VLAN_IFACE=`echo $VLANS_DEV | cut -d "." -f1`
				VLAN_ID=`echo $VLANS_DEV | cut -d "." -f2`
				$VCONFIG_PATH add $VLAN_IFACE $VLAN_ID > /dev/null 2> /dev/null
			fi
		else
			echo "8021q Module not loaded"
		fi
	else
		echo "please install vconfig: pacman -S vconfig"
	fi
}
vlan_rem()
{
	vconfig rem $1
}
#
### Main ###
if [ ! -e $LSMOD_PATH ];then
	echo "/usr/bin/lsmod not available, unable to check vlan module"
else
	for vlans in ${VLAN_DEVS[@]}; do
		vlan_add $vlans   
	done
fi

Adapt “/etc/rc.d/network” Attention: the changed are gone after update initscripts.
Add these lines before the other includes.

# vlan settings
[ -f /etc/conf.d/create_vlans ] && . /etc/conf.d/create_vlans

configure VLANs

VLAN interfaces now can be entered in the rc.conf.
With “VLAN_DEVS=()” the interfaces were created [Interface.VLAN_ID].
Then you can assign an IP-Adresse to the interface. The interface name is “vlan6” for example. This name must not contain “.” or “ ”.

Example:

#VLANs
VLAN_DEVS=(eth0.6)

interface=eth0
address=
netmask=
broadcast=
gateway=

interface=eth0.6
address=172.16.10.1
netmask=255.255.0.0
broadcast=172.16.255.255
gateway=

2010-07-23 10:01 · eanderAlx · Tags:

Postfix use with gmx

How to use postfix to send mails via a public provider.
Here an example with gmx using Ubuntu.